Yaesu FT-857D

Allikas: Traadita Wiki by Jan & Co.

Yaesu FT857D.jpg

Type:	             Amateur HF/VHF/UHF transceiver
Frequency range:    TX: 10-160 m.

                    TX WARC 30m - 10,100-10,150 MHz
                    TX WARC 17m - 18,068-18,168 MHz
                    TX WARC 12m - 24,890-24,990 MHz

                    TX: 
                    60 m  - 
                     6 m  -  50-55  MHz
                     2 m  - 137-164 MHz
                    70 cm - 420-470 MHz

                    TX Mod: 11m & PMR446

                    RX: 0.1-76 MHz
                     WFM  -  76-108 MHz
                     2 m  - 118-137 MHz
                     2 m  - 137-164 MHz
                    70 cm - 420-470 MHz
Mode:	             AM/FM/SSB/CW and WFM (RX only)
RF Power output:    6-160 m: 100 W 2 m: 50 W 70 cm: 20 W
Voltage:	     13.8 VDC
Current drain:	     RX: 0.6-1 A
                    TX: Max 22 A
Impedance:	     50 ohms, 1*SO-239 + 1*N-type
Dimensions (W*H*D): 155*52*233 mm
Weight:	     2.1 Kg
Manufactured:	     2004-200x
Other:	             Built-in keyer. 
                    Beacon mode. 
                    32 color display.
                    CTCSS. 
                    200 memories. 
                    Detachable front panel.
                    DSP included in this updated version

Sisukord

Menüü ja menüü funktsioonide kirjeldus

See Adjust_Menu for second set of menu functions

Main Menu Commands
NoMenu ItemFunctionAvailable ValuesDefault
001EXT MENUEnables/Disables the extended Menu Mode.ON/OFFOFF
002144MHz ARSActivates/deactivates the Automatic Repeater Shift feature when
operating on the 144 MHz band.
ON/OFF×1
003430MHz ARSActivates/deactivates the Automatic Repeater Shift feature when
operating on the 430 MHz band.
ON/OFF×1
004AM&FM DIALEnabling/disabling the DIAL knob on the AM and FM modes.ENABLE/DISABLEDISABLE
005AM MIC GAINAdjusts the microphone gain level for the AM mode.0 ~ 10050
006AM STEPSelects the tuning steps for the MEM/VFO CH knob on the AM mode.2.5/5/9/10/12.5/25kHz×1
007APO TIMESelects the Auto Power Off time (time before power goes off).OFF/1h ~ 6hOFF
008ARTS BEEPSelects the ARTS beep mode.OFF/RANGE/ALLRANGE
009ARTS IDEnables/disables the CW identifier during ARTS operation.ON/OFFOFF
010ARTS IDWStores your callsign into the CW identifier.YAESU
011BEACON TEXT 1Stores the message for the Beacon.
012BEACON TIMESelects the interval time (between message and message).OFF/1 sec ~ 255 secOFF
013BEEP TONESelects the beep frequency.440/880/1760 Hz880 Hz
014BEEP VOLSelects the beep volume level.0 ~ 10050
015CAR LSB RSets the Rx Carrier Point for LSB.–300 ~ +300 Hz0 Hz
016CAR LSB TSets the Tx Carrier Point for LSB–300 ~ +300 Hz0 Hz
017CAR USB RSets the Rx Carrier Point for USB–300 ~ +300 Hz0 Hz
018CAR USB TSets the Tx Carrier Point for USB–300 ~ +300 H0 Hz
019CAT RATESets the transceiver’s circuitry for the CAT baud rate to be used.4800bps/9600bps/38400bps4800bps
020CAT/LIN/TUNSelects the device which is connected to the CAT/LINEAR
jack on the rear panel.
CAT/LINEAR/TUNERCAT
NoMenu ItemFunctionAvailable ValuesDefault
021CLAR DIAL SELDefines the “control” knob to be used for setting of the clarifier
offset frequency.
CLAR, M/V, MAINCLAR
022CW AUTO MODESelects whether the KEY jack shall be “Enabled” or “Disabled”
while using the SSB/FM modes.
ON/OFFOFF
023CW BFOSets the CW carrier oscillator injection side on the CW mode.USB/LSB/AUTOUSB
024CW DELAYSets the receiver recovery time during pseudo-VOX CW semi
break- in operation.
FULL/30 ~ 3000 msec250 msec
025CW KEY REVSets the keyer paddle’s wiring configuration.NORMAL/REVERSENORMAL
026CW PADDLEEnables/disables CW keying by the microphone’s [UP]/[DWN]
keys.
ELEKEY/MICKEYELEKEY
027CW PITCHSetting of the pitch of the CW sidetone, BFO offset, and CW filter
center frequencies.
400 ~ 800 Hz700 Hz
028CW QSKSelects the time delay between when the PTT is keyed and the car-
rier is transmitted during QSK operation when using the internal keyer.
10/15/20/25/30 ms10 ms
029CW SIDE TONESetting of the CW sidetone volume level.0 ~ 10050
030CW SPEEDSets the sending speed for the built-in Electronic keyer.4 ~ 60 wpm (1wpm/step)/
20 ~ 300 cpm (5cpm/step)
12 wpm
(60 cpm)
031CW TRAININGSends random Morse Code five-character groups via the sidetone.N, A, ANN
032CW WEIGHTSets the Dot:Dash ratio for the built-in electronic keyer.1:2.5 ~ 1:4.501:03.0
033DCS CODESetting of the DCS code.104 Standard DCS codes23
034DCS INVSelects “Normal” or “Inverted” DCS coding.Tn-Rn/Tn-Riv/Tiv-Rn/Tiv-RivTn-Rn
035DIAL STEPSetting of the DIAL knob’s tuning speed.FINE/COARSEFINE
036DIG DISPDefines the displayed frequency offset during DIG (USER-L or
USER-U) mode operation.
–3000 ~ +3000 Hz0 Hz
037DIG GAINAdjusts the audio input level from terminal equipment during DIG
(Digital) mode operation.
0 ~ 100 50
038DIG MODESelects the mode and sideband in the DIG (Digital) mode.RTTY-L/RTTY-U/PSK31-L/
PSK31-U/USER-L/USER-U
RTTY-L
039 DIG SHIFTDefines the carrier frequency offset during DIG (USER-L or USER-
U) mode operation.
–3000 ~ +3000 Hz0 Hz
040DIG VOXSets the gain of the VOX circuitry’s input level for the DIG mode.0 1000
NoMenu ItemFunctionAvailable ValuesDefault
041DISP COLORSelects the illumination color for each operating status.
042DISP CONTRASTSetting of the display contrast level.0 135
043DISP INTENSITYSetting of the display brightness level.0 (Dim) 3 (Bright)3
044DISP MODESets up the LCD Lamp mode.OFF/AUTO1/AUTO2/ONAUTO2
045DSP BPF WIDTHSetting of the bandwidth for the DSP CW audio filter.60/120/240 Hz240 Hz
046DSP HPF CUTOFFAdjusts the low-cut characteristics of the DSP HPF filter.100 1000 Hz100 Hz
047DSP LPF CUTOFFAdjusts the high-cut characteristics of the DSP LPF filter.1000 6000 Hz6000 Hz
048DSP MIC EQSets the DSP microphone equalization pattern.OFF/LPF/HPF/BOTHOFF
049DSP NR LEVELSetting of the degree of DSP Noise Reduction.1 168
050EMERGENCYEnables Tx/Rx operation on the Alaska Emergency Channel,
5167.5 kHz.
ON/OFFOFF
051FM MIC GAINAdjusts the microphone gain level for the FM mode.0 10050
052FM STEPSelects the tuning steps for the MEM/VFO CH knob in the FM
mode.
5/6.25/10/12.5/15/20/25/
50 kHz
×2
053HOME-->VFOEnables/disables the moving of HOME channel data to the VFO.ON/OFFON
054LOCK MODESelects the operation of the front panel’s LOCK key.DIAL/FREQ/PANEL/ALLDIAL
055MEM GROUPEnables/disables the memory grouping feature.ON/OFFOFF
056MEM TAGStores Alpha-Numeric “Tags” for the memory channels.
057MEM/VFO DIAL MODESelects the function which is engaged when you press the MEM/
VFO CH knob.
CW SIDETONE, CW SPEED,
MHz/MEM GRP, MIC GAIN,
NB LEVEL, RF POWER, STEP
MHz/MEM GRP
058MIC SCANEnables/disables scanning access via the microphone’s [UP]/
[DWN] keys.
ON/OFFON
059MIC SELThe choice of the equipment which connects to the MIC jack.NOR/RMT/CATNOR
060MTR ARX SELSelect the meter display configuration while the transceiver is
receiving.
SIG, CTR, VLT, N/A, FS, OFFSIG
NoMenu ItemFunctionAvailable ValuesDefault
061MTR ATX SELSelects the meter display configuration while the transceiver is
transmitting.
PWR, ALC, MOD, SWR,
VLT, N/A, OFF
PWR
062MTR PEAK HOLDEnabling/disabling of the “peak hold” function of the meter.ON/OFFON
063NB LEVELSetting of the blanking level for the IF Noise Blanker.0 10050
064OP FILTER 1Not available at this time.
065PG AProgramming the [A] key (in the Operating Function Row 17)
function.
All Multi Function , all Menu
Item, MONI, Q.SPL, TCALL,
ATC and USER.
MONI
066PG BProgramming the [B] key (in the Operating Function Row 17)
function.
Q.SPL
067PG CProgramming the [C] key (in the Operating Function Row 17)
function.
ATC
068PG ACCNot available at this time.
069PG P1Not available at this time.
070PG P2Not available at this time.
071PKT 1200Adjusts the audio input level from the TNC during 1200 bps Packet operation.0 10050
072PKT 9600Adjusts the audio input level from the TNC during 9600 bps Packet operation.0 10050
073PKT RATESets the transceiver’s circuitry for the Packet baud rate to be used.1200/9600 (bps)1200 bps
074PROC LEVELSets the compression level for the AF speech processor in the SSB/AM modes.0 10050
075RF POWER SETSetting of the maximum power level for the current band.5 100100
076RPT SHIFTSets the magnitude of the repeater shift.0.00 99.99 (MHz)×2
077SCAN MODESelects the desired Scan-Resume mode.TIME/BUSY/STOPTIME
078SCAN RESUMESets the delay time for scanning resumption.1 10 (sec)5 sec
079SPLIT TONEEnables/disables split CTCSS/DCS cording.ON/OFFOFF
080SQL/RF GAINSelects the configuration of the front panel’s SQL/RF knob.RF-GAIN/SQL×1
NoMenu ItemFunctionAvailable ValuesDefault
081SSB MIC GAINAdjusts the microphone gain level for the SSB mode.0 10050
082SSB STEPSelects the tuning steps for the MEM/VFO CH knob on the SSB mode.1kHz/2.5kHz/5kHz2.5 kHz
083TONE FREQSetting of the CTCSS Tone Frequency.50 Standard CTCSS tones88.5 Hz
084TOT TIMESelect the Automatic Power Off time.OFF/1 20 (min)OFF
085TUNER/ATASSelects the device (FC-30 or ATAS-100/-120) to be controlled via the front panel’s [A](TUNE) key.OFF/ATAS(HF)/ATAS(HF&50)
/ATAS(ALL)/TUNER
OFF
086TX IF FILTERSelects the Transmit IF filter.CFIL/FIL1/FIL2CFIL
087VOX DELAYSets the “hang time” for the VOX circuitry.100 3000 (ms)500 ms
088VOX GAINSets the gain of the VOX circuitry’s input audio detector.1 10050
089 XVTR A FREQ Allows an arbitrary frequency to be set on the display, to allow
direct frequency readout during transverter operation.
00,000,00 99,999,99 (kHz)
090XVTR B FREQ
091XVTR SELEnables/disables/selects the antenna port to be used for Transverter operation.OFF/X VTR A/X VTR BOFF


×1: Depends on transceiver version.
×2: Depends on operating band and transceiver version.

Tähtsamad heli ja muud seaded menüüst

001EXT MENUON-
005AM MIC GAIN80TX AM
041DISP COLORFIX:26-
042DISP CONTRAST4-
043DISP INTENSITY1-
044DISP MODEAUTO2-
046DSP HPF CUTOFF280RX
047DSP LPF CUTOFF2690RX
048DSP MIC EQHPFTX
051FM MIC GAIN80TX FM
052FM STEP25-
054LOCK MODEALL-
065PG AA/B-
066PG BIPORX
067PG CMONIRX
074PROC LEVEL50TX SSB/AM
075RF POWER SET100TX
080SQL/RF GAINRF-GAINRX
081SSB MIC GAIN80TX SSB
082SSB STEP1-

Peidedetud menüü

I want to warn you do not change these values unless you are sure of what you are doing. To get them turn transceiver off. Press and hold the A,B,C keys; while holding them in, press and hold in the [PWR] switch for 1/2 second to turn the tranceiver On. Now let go of all keys. Attention, for menu NO-017. Input voltage 13.8V = 138 to calibre voltmeter. Press F key to finish.

=============================================================
Adjust-No      Function            Setting  Mode    Frequency
=============================================================
NO-001         HF1-RXG             68         CW     1.840.00
NO-002         HF2-RXG             66         CW     7.035.15
NO-003         HF3-RXG             66         CW    21.070.15
NO-004         50M-RXG             64         CW    50.107.50
NO-005         VHF-RXG             65         CW   145.437.50
NO-006         UHF-RXG             64         CW   438.900.00
NO-007         SSB-S9              88         CW    21.070.15
NO-008         SSB-FS              54         CW    21.225.13
NO-009         FM-S1               68         FM   145.437.50
NO-010         FM-FS               99         FM   145.437.50
NO-011         DISC-L              50         FM   145.437.50
NO-012         DISC-H              79         FM   145.437.50
NO-013         FM-TH1              100        FM   145.437.50
NO-014         FM-TH2              100        FM   145.437.50
NO-015         FM-TI1              10         FM   145.437.50
NO-016         FM-TI2              10         FM   145.437.50
NO-017         VCC                 138        FM   145.437.50
NO-018         HF1-IC              83         CW     1.800.00
NO-019         HF2-IC              80         CW     7.068.19
NO-020         HF3-IC              87         CW    21.225.13
NO-021         50M-IC              84         CW    50.000.00
NO-022         VHF-IC              72         CW   145.437.50
NO-023         UHF-IC              74         CW   438.900.00
NO-024         HF1-PO-MAX          165        CW     1.800.00
NO-025         HF1-PO-MID2         105        CW     1.800.00
NO-026         HF1-PO-MID1         31         CW     1.800.00
NO-027         HF1-PO-MIN          13         CW     1.800.00
NO-028         HF2-PO-MAX          159        CW     7.068.19
NO-029         HF2-PO-MID2         102        CW     7.068.19
NO-030         HF2-PO-MID1         29         CW     7.068.19
NO-031         HF2-PO-MIN          11         CW     7.068.19
NO-032         HF3-PO-MAX          158        CW    21.225.13
NO-033         HF3-PO-MID2         101        CW    21.225.13
NO-034         HF3-PO-MID1         29         CW    21.225.13
NO-035         HF3-PO-MIN          11         CW    21.225.13
NO-036         50M-PO-MAX          145        CW    50.000.00
NO-037         50M-PO-MID2         92         CW    50.000.00
NO-038         50M-PO-MID1         47         CW    50.000.00
NO-039         50M-PO-MIN          8          CW    50.000.00
NO-040         VHF-PO-MAX          87         CW   145.437.50
NO-041         VHF-PO-MID          43         CW   145.437.50
NO-042         VHF-PO-MIN          7          CW   145.437.50
NO-043         UHF-PO-MAX          112        CW   438.900.00
NO-044         UHF-PO-MIN          16         CW   438.900.00
NO-045         HF1-TXG             48         USB    1.800.00
NO-046         HF2-TXG             38         USB    7.068.19
NO-047         HF3-TXG             43         USB   21.225.13
NO-048         50M-TXG             40         USB   50.000.00
NO-049         VHF-TXG             47         USB  145.437.50
NO-050         UHF-TXG             49         USB  438.900.00
NO-051         ALC1-M              203        USB   21.225.13
NO-052         ALC-M               85         USB   21.225.13
NO-053         HF1-REV-ALC         61         CW     1.800.00
NO-054         HF2-REV-ALC         56         CW     7.068.19
NO-055         HF3-REV-ALC         50         CW    21.225.13
NO-056         50M-REV-ALC         47         CW    50.000.00
NO-057         VHF-REV-ALC         62         CW   145.437.50
NO-058         UHF-REV-ALC         57         CW   438.900.00
NO-059         CW-CAR-LEVEL        144        CW    21.225.13
NO-060         AM-CAR-LEVEL        125        AM    21.225.13
NO-061         DEV-W               216        FM   145.437.50
NO-062         DEV-N               110        FM   145.437.50
NO-063         MOD-MTR             200        FM   145.437.50
NO-064         DTMF-DEV            10         FM   145.437.50
NO-065         CTCSS-DEV           233        FM   145.437.50
NO-066         DCS-DEV             168        FM   145.437.50
NO-067         LSB-CAR-POINT       -7         LSB   21.225.13
NO-068         USB-CAR-POINT       +5         USB   21.225.13
NO-069         VSWR2 at 10W        17         CW    14.257.90
NO-070         VSWR3 at 10W        42         CW    14.257.90
NO-071         ATAS-TEST                      LSB   14.257.90
NO-072         AMTR-TEST                      LSB   14.257.90
NO-073         HTEMP-THRESHOLD     38         LSB   14.257.90
NO-074         FTEMP-THRESHOLD     102        LSB   14.257.90

Kasulikud menüü seaded

Toon 1750   - Hoiad all HOME klahvi seni kuni toon eetrisse läheb.
CTCSS skänn - FUNC -> SELECT -> [TON, –––, TDCH] -> C (TDCH)
DCS skänn   - FUNC -> SELECT -> [TON, –––, TDCH] -> A x 3 (DCS ) -> C (TDCH)
Jaama Reset - Hoia all F + V/M ja lülita jaam välja.

TX avamine 1.8-56MHz, 137-164MHz, 420-470MHz

 HF: TX on   1.800 MHz through to  33.000 MHz no breaks.
VHF: TX on  33.000 MHz through to  56.000 MHz no breaks.
VHF: TX on 137.000 MHz through to 164.000 MHz no breaks.
UHF: TX on 420.000 MHz through to 470.000 Mhz no breaks.

Plaat enne avamist (UK versioon)

Closed TX 857D.png

Plaat peale avamist

Open TX 857D.PNG

Vajalikud jooted TX avamise puhul

----JAAMA TAGUMINE POOL------

1007 - Jumper - (Tuleb lühistada)
1008 - Jumper - On juba lühistet.
1009 - Jumper - (Tuleb lühistada)
1004 - Blank  - Oli tühi ja jääb tühjaks.
1005 - Blank  - Oli tühi ja jääb tühjaks.
1006 - Jumper - On juba lühistet UK versil, kuid mitte DE versil.
1001 - Blank  - (Tuleb eemaldada)
1002 - Blank  - (Tuleb eemaldada) avab 40m 7.100 to 7.200 mhz (UK versioonil kinni algselt)
1003 - Blank  - Oli tühi ja jääb tühjaks.

----JAAMA ESIMENE POOL-----

Peale klemmide eemaldamist vajuta ja hoia all [FUNC] ja [V/M] ja lülita raadio tööle.

jumperite erinevad variandid

Ft857d jumpers.jpg

Sagedused erinevate jumprite asetuse korral

Type TX Frequency Range RX Frequency Range JUMPER (J10**) Remarks
HF VHF UHF HF VHF UHF 01 02 03 07 08 09 FM CH Step RPT Shift
B1 BAND 1 144-146 430-440 0.1-30/50-54/87.5-108 144-146 430-440 X X X X X 12.5/25kHz 0.1/0/0.6/7.6MHz
B2 BAND 1 144-146 430-440 0.1-33/33-56/76-108 118-164 420-470 X X X 12.5/25
kHz
0.1/0/0.6/7.6MHz
B3 BAND 2 137-164 420-470 0.1-33/33-65/76-108 118-164 420-470 X X 12
.5/25kHz
0.1/0/0.6/7.6MHz
C1 BAND 3 144-146 430-440 0.1-30/50-54/87.5-108 144-146 430-440 X X X X 12.5/25kHz 0.1/0.5/0.6/1.6MHz
C2 BAND 3 144-146 430-440 0.1-33/33-56/76-108 118-164 420-470 X X X 12.5/25kHz 0.1/0.5/0.6/1.6MHz
C3 BAND 2 137-164 420-470 0.1-33/33-56/76-108 118-164 420-470 X X 12.5/25kHz 0.1/0.5/0.6/1.6MHz
D1 BAND 4 144-146 432-438 0.1-30/50-54/87.5-108 144-146 432-438 X X X X X 12.5/25kHz 0.1/0/0.6/1.6MHz
D2 BAND 4 144-146 432-438 0.1-33/33-56/76-108 118-164 420-470 X X X X 12.5/25kHz 0.1/0/0.6/1.6MHz
E1 BAND 5 144-146 430-440 0.1-30/50-54/87.5-108 144-146 430-440 X X X X 12.5/25kHz 0.1/0/0.6/1.6MHz
E2 BAND 5 144-146 430-440 0.1-33/33-56/76-108 118-164 420-470 X X X 12.5/25kHz 0.1/0/0.6/1.6MHz
E3 BAND 2 137-164 420-470 0.1-33/33-56/76-108 118-164 420-470 X X 12.5/25kHz 0.1/0/0.6/1.6MHz
BAND 160 m 80 m 40 m 30 m 20 m 17 m 15 m 12 m 10 m 6 m
1 1.815-1.890 3.500-3.800 7.000-7.100 10.100-10.150 14.000-14.350 18.068-18.168 21.000-21.450 24.890-24.990 28.000-29.700 50.000-52.000
2 1.800-2.000 3.500-4.000 7.000-7.500 10.000-10.500 14.000-14.500 18.000-18.500 21.000-21.500 24.500-25.000 28.000-30.000 50.000-54.000
3 1.800-2.000 3.500-3.800 7.000-7.100 10.000-10.150 14.000-14.350 18.068-18.168 21.000-21.450 24.890-24.990 28.000-29.700 50.000-52.000
4 1.820-1.850 3.500-3.800 7.000-7.100 10.100-10.150 14.000-14.350 18.068-18.168 21.000-21.450 24.890-24.990 28.000-29.700 50.200-52.000
5 1.810-1.850 3.500-3.801 7.000-7.100 10.100-10.150 14.000-14.350 18.068-18.168 21.000-21.450 24.890-24.990 28.000-29.700 50.200-51.200

Jumpers 1004, 1005, and 1006 are not listed on the original document, however they appear to be geographically based. 1006 for example is set for US and AU models and not set for DE and FR models. Additionally, 1006 enables menu 50 which is the Alaskan emergency frequency.

Mikrofoni RJ45 pistiku PIN-d

Nr Mic Mode           Extra Functions
1  FAST               Power Switch
2  Ground (control)   PTT (Ground)
3  PTT                PTT
4  Mic AF             Mic AF
5  Ground (Mic)       Ground (Mic)
6  + 5V               + 5V
7  UP                 RXD
8  DOWN               TXD
FT-857 897 817 450 modular socket.png
FT-857 897 817 450 mic plug.png

CAT ja DATA pin-d

Yaesu 857d cat data.png
CAT-programming.png

CAT kaabel

Yaesu 857D CAT cable.png


Yaesu 857D CAT interface.png

DATA & CAT cable

Yaesu857 CAT data schematic.jpg
Yaesu857 CAT digital inside.jpg
Yaesu857 CAT digital interface.jpg
W7ki ft857 interface.jpg

Separation kit YSK-857

Yaesu-YSK-857.jpg

The YSK-857 Separation Kit consists of Front Panel mounting hardware and two 19.6 foot (6 m) interconnecting cables for the Front Panel. The kit allows the main body of the FT-857/D to be installed in the trunk, or anywhere else out of the way. The kit consists of:

  • Front Panel Nest
  • Controller Extension Cable
  • Speaker Extension Cable
  • Microphone Extension Cable
  • Double-Sided Adhesive Tape
  • Mounting Screws, Washers & Nuts

Microfoni kaabel ja esipaneeli kaabel

  • Mikrofoni kaabel on RJ45 (8 pin) pistikutega ja otsekabel. (Straight Cable)
  • Esipaneeli kaabel on RJ12 (6 pin) pistikutega ja otsekaabel. (Straight Cable)

Lisa filtrid

3.8 kHz filter (526-8710-010) - This gives you a very open and rich sound in SSB.

Kaitsmed

2 X 25A.

Toitekaabel

6-pin DC plug, with 4-pins 
Yaesu-HF Power-Pigtail.jpg

Voolu tarbivus

                                                14V  	12V  
Vastuvõtul SSB, minimaalse heliga (145МHz)	470мА	----
Vastuvõtul SSB, minimaalse heliga  (HF)        620мА	610мА
Vastuvõtul SSB, keskmise heliga  (HF)	        640мА	630мА
Vastuvõtul SSB, maksimaalse heliga  (HF)       790мА	770мА
CW, saatel, 100W                                 19А	17А
CW, saatel, 50W                                  12А	9.9А
CW, saatel, 20W                                 8.2А	7.5А
CW, saatel, 5W                                  3.9А	3.1А
SSB, saatel ilma helita                         1.4А	----

Puudused

  • 2m ala on maha lõigatud - 137-164 (võiks olla 137-174 nagu on seda teised allband jaamad)
  • AM-s on saade vaid 25W. Võiks olla 100W.
  • PTT kaabli abil arvutist AM-s saatele ei lähe !!!
  • RX võiks olla lahti suuremalt.
  • Helifiltrid algselt jaamas puuduvad, ICOM jaamadel näiteks on korraga olemas.

Muud tähelepanekud, mis menüüs võivad kogemata jääda aktiveerituks

  • Kui menüü Nr: 22 on aktiveeritud s.o. CW AUTO MODE = ON, siis jaam läheb saatele CW modes !!!

Programming software

http://www.rtsystemsinc.com/Photos/USB62B.html

ADMS-4BV4.jpg

Jaama juhtimiseks

Failid

Välised lingid

Portable Operations Yaesu FT-857D

Personaalsed tööriistad